By Kevin | 22 September 2025 | 0 Comments
100mm 4 inch brandt hydrocyclones ft for brandt 20 cones desilter
Brandt 4-inch cones are hydrocyclones used in mud cleaners and desilters for drilling fluid and solids control. They are designed to separate fine solids, sands, and silt from drilling mud in the oil and gas industry.
Key features
Key features
- Application: A 4-inch desilter cone is typically used as a third stage of solids control in a drilling mud system, after a shale shaker and desander have removed larger particles.
- Purpose: The cones separate fine particles ranging from approximately 12 to 457 microns by using centrifugal force.
- Material: They are manufactured from highly durable materials, such as cast urethane, which are resistant to heat, abrasion, and chemicals found in drilling fluids.
- Unit configuration: Desilter units typically contain multiple 4-inch cones. For example, brandt desilter has 20 pcs of cones.
- Direct replacements: The OEM parts for Brandt equipment.
- Aftermarket equivalents: Other manufacturers produce cones that are functionally equivalent to the Brandt 4-inch desilter cones, solids control equipment suppliers.
Leave a Reply
Your email address will not be published.Required fields are marked. *